Register
Log In
Home
Add Reply
Add Topic
March 30, 2016
Offline
i'm replacing a couple of old Northern DTW212HIR960 analog cams with the HDOD-AL2IRW cams.
the old Northern has a different power connector than the AL2IRW as you can see in the attached images.
anyone know of an adapter/coupler i can use to the Northern so the AL2IRW can plug into the power?
See Answer
January 3, 2014
Offline
It seems like your attached images were not attached.
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: support@securitycameraking.com
March 30, 2016
Offline
Jose Malave said
It seems like your attached images were not attached.
may be they were too large. i resized them down 75%. we'll see if they got uploaded this time.
edit: when i upload the images now, they get distorted for some reason. they view fine when i upload in the upload attachments box. so i don't know what the issue is.
January 3, 2014
Offline
I see, one is a terminal block and the other is a 3.5MM DC Plug.
You can use this item here https://www.securitycameraking.....ads-cable/ were one side will go to the block and the other to the camera.
Answers Post
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: support@securitycameraking.com
March 30, 2016
Offline
Jose Malave said
I see, one is a terminal block and the other is a 3.5MM DC Plug.
You can use this item here https://www.securitycameraking.....ads-cable/ were one side will go to the block and the other to the camera.
thanks much Jose!!
1 Guest(s)
