Register
Log In
Home
Add Reply
Add Topic
May 28, 2016
Offline
I have a customer with an 8 port Sibell NVR with 6 2MP cameras. 4 cameras inside the office and 2 outside. They wanted to turn on the push notification and all cameras are sending out the push on motion detection. The problem is the They only want push on the inside cameras because there is to much motion outside and they get to many notifacation for the outside 2. Can you set up so only certain cameras will do push and turn it off on the others?
See Answer
January 3, 2014
Offline
Please post the Model number of the recorder and its firmware.
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: support@securitycameraking.com
May 28, 2016
Offline
NVR-SB16ME Firmware 1.1.0.0R3.B170608S
January 3, 2014
Offline
You can edit this within the Sibell Mobile app itself. Go to the "Guy" icon and select "Push Setting" after this Select the recorder ">" and turn on the "Device Notification Function". Here in this menu, you will see all of the triggers and what cameras to accept alerts from. For example, if you want push notifications based on motion select the "motion" section and select "Open All" a new window should pop up and give you the ability to select which cameras you want after this do not forget to press on the save icon that is located on the top right corner.
Answers Post
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: support@securitycameraking.com
1 Guest(s)
