Register
Log In
Home
Add Reply
Add Topic
August 17, 2014
Offline
Hi guys... I am trying to integrate my newly-purchased Prime Series Tribrid DVR with my home automation system; however, I cannot find any posts regarding the URL to retrieve a JPG snapshot (by channel) for this series - only for the Sibel and Elite Series. Unfortunately, the URL for my old Federal series does not work on this new box either.
Anyone tried this or have some insight?
Thanks!
See Answer
January 3, 2014
Offline
Snapshot for Prime
http:// -ip address- /Streaming/channels/1/picture
Answers Post
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: support@securitycameraking.com
August 17, 2014
Offline
Hi Jose... thanks for the reply. Unfortunately, that doesn't seem to be working for me:
http://192.168.86.25/Streaming...../1/picture
Returns a 404 Not Found page. Going straight to the IP address does load the login page for the primary interface, so the web server is up and running. Do I need to set anything on the device to allow this?
Thanks!
Adam
January 3, 2014
Offline
Please state the firmware version of the NVR. I will go ahead and run some tests here and see what is happening.
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: support@securitycameraking.com
August 17, 2014
Offline
Thanks, Jose... looks like my Firmware Version is V3.3.3 build 170224.
August 17, 2014
Offline
Any chance you had any luck finding out the snapshot URL?
Thanks!
January 3, 2014
Offline
did you use http://user:password@xxx.xxx.x.....01/picture
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: support@securitycameraking.com
1 Guest(s)
