Hi Jose,

i realize I should have been more specific.

I have your 30x PTZ (30X Elite 2MP IP Network Smart PTZ - IPPTZ-EL2IR30X-D2US) it is powered by an inline poe injector which is IEEE 802.3at compliant and want to add a mic for audio.  The mic I have is similar to your powered microphone with a white and red male rca plug.
How do I hook this up so that it gets power from my poe power supply which is the more powerful
IEEE 802.3at needed to power the 30x PTZ?

Thanks,
Tubac

Thank you Jose.

Ok, should I be looking for a IEEE802.3at splitter? I don't see one on your site, but would that work to share power between my 24v PTZ and 12v mic?

Thanks,

Tubac

I see...after speaking to you I think the best way might be to power the mic with a 12v 1amp power supply adding a 50 ft extension cable. The 30x PTZ's audio leads on the pigtail are not terminated. What size plugs should I buy and would they be male or female?

Thanks!

Thanks!

Just to be clear, the camera has a poe+ injector for power. I plan to power the mic with a seperate 12v 1a power supply and just need to terminate the audio on the camera's pigtail. In that case I would just use RCA Male to BNC Female (single)?

Thanks, Jose

Just a couple more questions... I lost the tags on the pigtail of the camera. Is there another way to ID which wires are the audio  wires on the pigtail? Lastly what color wire goes on the plus side of the balun and which on the negative side. I am just about ready to do this.

Best,

Tubac