Register
Log In
Home
Add Reply
Add Topic
August 23, 2020
Offline
Hey Guys,
I am writing to ask a question or two.
I purchased some card access keyfobs and each one has a number on them.
They work fine on card access system but need some info.
When I scan the keyfobs the numbers that show up are not the same as printed on the keyfobs.
Is that normal? I thought they would be the same which is why I am asking.
Same issue and question for access cards.
Thanks in advance
Bleak
See Answer
January 3, 2014
Offline
Because we have 2 different Access Control Brands the numbers on the card may not be the same as what the board will see from the reader, because of this you will need to scan, if you want to have cards of fobs with the numbers it would be considered a special order and I do believe there is a minimum quantity which you could speak to sales on at 561 288-5258
Answers Post
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: support@securitycameraking.com
August 23, 2020
Offline
Jose Malave said
Because we have 2 different Access Control Brands the numbers on the card may not be the same as what the board will see from the reader, because of this you will need to scan, if you want to have cards of fobs with the numbers it would be considered a special order and I do believe there is a minimum quantity which you could speak to sales on at 561 288-5258
Hello Jose,
Thanks for the help and info.
Have a great day and stay safe.
Bleak
1 Guest(s)
